including a round house. covered water tower. and at least two wyes at various times to turn the engines

a tub. The model is shaped wood for the tower and soft metal detail parts. fan is made up of individual

FOR SALE: Builtup Campbell's coaling tower and sand house (HOn3); Pacific Traction HOn3 stockear, other

prototype, 3' ga., 3 ph Coaling tower and sanding chute, T. W, Snow prototype, 1:87 ratio, 1 pk Donkey

up of castings. The full underbody of the tower is represented in the pit. The coal hopper and charging...as are all cables and sheaves to work the tower. The hoisting shed is a real masterpiece of detail. the main...tower and consists of an open shed. However in the shed are the following: and gear box castings, switchboard with fuse boxes

a beaut. ties and railing across the top. tower in the center used for holding up the power leads for the

It shows the sanding house and coaling tower. Both follow the

depres sed track extends down from the coal tower. The pit is on the north side of the turntable opposite the

Al Construction of D & RGW coaling tower, 75 prototype; notes, drawings and photographs 3 p4, 4 plO...shed, Maine Central, Wiscasset 2 Coaling tower, D & RGW, Chama, 3' ga. 4 pl3, 6 p5 Water tank, C Water tank, Phillips

Smelting & Refining Co.) 6 p4 Chama Tower Series of articles on D & RGW 75 ton prototype construction...1 p4 # Constructing the Chama Coaling Tower D & RGW prototype, 3' ga., notes, photos, and drawings, in installments...Nos. 53, 61, 62 Chama coal tower, construction articles, house >>nlan, 3 p4, 4 plO, 6 p5 Coupler

1/4" scale station built by Arthur The tower was Hochhalter. added and the bay window and freight area

interior Scratch-built, super-detailed signal tower, fully lighted, with real connections to telegraph pole

in this photo of his On3 D&RGW coaling tower before Al Klinke's articles appeared long I have been holding

of bin 2'0 X bracing for Chama SS tower measurements are approx. 2 parallel 8" x 18's bottom of bin...Mo pf The west end of the Chama tower, Coal chute door detail above. Al Klinke. Photos by

roofing paper is still on the Chama tower. Windows and door arrangements for the Chama tower are incorrectly shown and should be those illustrated...of the timbers supporting the hoist tower. from the pictures on page 12 FL, the front tower posts go straight up from the rear sides of the coal bin...a gon unloaded and get the coal into the tower. A visit Again, the best The finished tower is well worth the man hours involved and the several thousand

his series on building the Chama coaling tower in time for this issue. sends his appologiese He The cover

Here are the underside of the tower structure and the house, the pins in the posts on the house...as well as the understructure of the tower. Note The drawing shows both ends of the house as drawn from...a 4514" 195" pe at CHAMA COAL TOWER Drawn by A. R.Klinke from measurements taken on July 16

Left to right. Chama tower, front view, 1966. left of window. Bottom, west side, 1967 showing...West side. chute. Bucket on Durango tower, 1967.. Front, showing coal delivery All pnotos by Al Klinke

sheets which are not visible when the tower is completed. I would recommend starting the tower siding from the top and work down. drawings from this point...feature about the Chama The Durango tower was tower is its color. a very dirty black, but the Chama tower was painted a box car red. It has gotton dirty over the years...tower article will probably go into one additional brief article to show the complete tower and discuss the construction of the coal gate and chute

CHAMA TOWER BY AL KLINKE CHAMA TOWER PART 2 After completing the concrete work on the This became...open the doors and 8 x 8s, next to the tower. The x 8s are used on the Chama tower. but 8 wood work here gets a tremendous beating and should...I found that by taking a Stain if tower accum~ I initially started my The erection drawings tower itself. using the erection drawings, but as ulated data